Jump to content
  • Announcements

    • Bill Strong

      BOD Nominations   10/03/2017

      Emails have been sent to all current CCWS Members with a link to BOD nominations. Please check your email.   You will need to ask the person you're nominating for their current 2017 CCWS Member Number. Keep in mind that we will contact each nominee to make sure they are OK with being a candidate. You can't nominate yourself either (sorry). All nominations are due by November 3, 2017. To keep from having 574 different nominees, a nominee must be named by at least five members to qualify. We will compile all the nominations and put the top ten nominees on the November 10, 2017, ballot. Elections are over on December 10, 2017. We will announce the winners on December 13, 2017, and the two winners will take office January 1, 2018. How to get your current CCWS member number. Log into the CCWS event registration system. Your member number will be next to your name on the welcome screen. https://www.chumpcar.com/register/login.php Mike Chisek
      President
      ChumpCar International, Inc.
Sign in to follow this  
Bill Strong

Live Stream with a GoPro

Recommended Posts

This is what ChumpCar uses in it's incar cameras that we put in some cars.
We use slightly different equipment, but it operates the same.

We currently use GoPro Hero5 Black, 26,800MA/h 3 usb port battery, Cerevo Live Shell 2 and a Verizon jetpack.

______________

 

 

Live-streaming with RaceCast.me using a GoPro

 
1*-SBM7DJKK9995TvG_gEncA.png

Even the newest model of GoPro doesn’t have the capability to broadcast on its own, however, if you plug one into a live-stream encoder (like the Teradek VidiU or Cerevo LiveShell.2) via HDMI you can broadcast high-definition (up to 1080p) audio & video.

 
1*VRoxx-l0kADSBeYIhZKOiQ.jpeg

The GoPro Hero2 Pro, Hero3, 3+ and Hero 4 (Silver or Black) all have HDMI outputs and can be used.

The new HERO, HERO+ LCD and Session will not work since they do not have HDMI output ports.

Since you will be zooming around a race track, you can’t connect the encoder to the paddock Wifi (standard Wifi doesn’t have enough range for that) so to get your broadcast to the internet, you mount a Mifi Hotspot in your car. The encoder will connect to the Hotspot over Wifi and broadcast through the Hotspot using cellular data.

The basic configuration looks like this. The $639 Teradek VidiU is shown in this example, but a $299 Cerevo LiveShell 2 seems to work nearly as well.

 
1*daRazvWzC63YPVUjvu6vQg.jpeg

To keep everything powered in your race car, we recommend purchasing a battery pack that gets charged from the car while it is on and provides power to the components for several hours (so your live-stream doesn’t drop during pit stops, etc when the car is turned off). Wiring diagram would be something like this:

 
1*QsMUHMj8uDstn1kOrDnYaQ.png
 
1*O6Kift0U74I8_hy1jq_uHQ.jpeg

Our favorite battery pack is the XT Power MP-10000. It offers 2 USB outputs (to power GoPro and Mifi) as well as a switchable 9/12V output (to power the VidiU).

Some of the newer battery packs cut power to the outputs while they are being charged, obviously this is a problem when used in a setup like this, so if you are looking to purchase a battery pack other than this one, please check the specs before purchasing to ensure the pack will supply power to the output ports while being charged.

The full .pdf version of our setup guide can be downloaded here.

Now get out there and STREAM THE WORLD!

  • Like 1

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×